產品中心 - PVC管材PRODUCTS
1、給水用U-PVC管材
2、特點:具有強度高,無毒,流體阻力小,安裝方便,易于貯存運輸?shù)忍攸c(diǎn),管材和管件采用橡膠密封圈或溶劑粘接密封,安全可靠;生產規格為公稱外徑φ20 mm ~φ450mm,公稱壓力0.4MPa~1.6MPa,適用用于城鄉市政供水系統
3、技術指標:
項 目project |
單位unit |
指標target |
密 度Density |
㎏/m3 |
1350-1460 |
維卡軟化溫度Uygur card softening point |
℃ |
≥80 |
縱向回縮率Longitudinal retraction rate |
% |
≤5 |
二氯甲烷浸漬試驗The methylene chloride soaks the experiment |
/ |
表面無變化no change in the surface |
落錘沖擊( |
% |
≤5 |
液壓試驗Water test |
/ |
無破裂、無滲漏not to burst,Does not seep |
連接密封試驗Joint packing experiment |
/ |
無破裂、無滲漏not to burst,Does not seep |
4、衛生指標:
項 目project |
指 標targect |
鎘的含量 ㎎/LCadmium content |
三次萃取,每次≤0.01 three extracts, each time <= 0.01 |
汞的含量 ㎎/L Mercury content |
三次萃取,每次≤0.001 three extracts, each time <= 0.001 |
鉛的含量 ㎎/L Lead content |
第一次萃取≤1.0 first extract <= 1.0 |
第三次萃取≤0.3 Third extract <= 0.3 |
|
錫的含量 ㎎/L Tin content |
第三次萃取≤0.02 third extract <= 0.02 |
氯乙烯單體含量 ㎎/㎏Chloroethylene monomer content |
≤1.0 <= 1.0 |
上篇:
下篇:
Copyrights © 2005-2024 Www.GsDyJsGs.Com, All Rights Reserved 大禹節水集團股份有限公司 隴ICP備12000040號 版權所有 設計制作 宏點網絡